Our ServiceIP ProductProduct
Your Location：Home > IP ProductBS 8509-2008+A1:2011 Children’s beds for domestic use – Safety requirements and test methods
It is for the children's bed with a maximum internal width of 1 000 mm and a maximum height of bed base of 600 mm.
Test Item:
| 5 | Chemical hazards |
| 5.1 | Migration of certain elements (for coating, accoridng to BS EN 71-3) |
| 5.2 | Formaldehyde |
| Total content and migration of formaldehyde (for textile, according to BS EN ISO 14184-1) | |
| Wood based panels – Determination of formaldehyde content – Extraction method called the perforator method（BS EN120） | |
| 6 | Thermal hazards |
| 6.1 | General |
| 6.2 | Flash effect (according to BS EN 1103) |
| 6.3 | Flame propagation (accoridng to BS EN 71-2, clause 4.4) |
| 6.4 | Melting behaviour of materials (accoridng to BS EN 71-2, clause 4.4) |
| 7 | Mechanical hazards - gaps and openings |
| 7.1.1 | Entrapment of head and neck |
| 7.1.2 | partially bound, V and irregular shaped openings |
| 7.2 | entrapment of fingers |
| 7.3 | Entrapment in bed base or between bed base and other structures |
| 8 | Mechanical hazards - folding |
| 8.1.1 | Incomplete deployment |
| 8.1.2 | Unintentional release of folding mechanisms |
| 9 | Mechanical hazards - crushing and shearing |
| 10 | Mechanical hazards - protruding parts |
| 11 | Mechanical hazards - entanglement in cords, ribbons and similar parts |
| 12 | Mechanical hazards - small parts |
| 13 | Mechanical hazards - suffocation |
| 14 | Mechanical hazards - edges and protruding parts |
| 15 | Mechanical hazards - points and wires |
| 16 | Mechanical hazards - inadequate structural integrity - materials and fastenings |
| 17 | Mechanical hazards - inadequate structural integrity - vertical static strength of bed base edges |
| 18 | Mechanical hazards - inadequate structural integrity - vertical impact strength of bed base |
| 19 | Mechanical hazards - inadequate structural integrity - durability of bed base |
| 20 | Mechanical hazards - inadequate structural integrity - durability of bed edge |
| 21 | Mechanical hazards - inadequate structural integrity - strength of head and foot boards. |
| 22 | Mechanical hazards - inadequate structural integrity - strength of side guards and/or safety rails |
| 23 | Mechanical hazards - inadequate structural integrity - strength of top rails for four poster features |
| 24 | Product Information (marking, durability of marking, purchase information, instruction for use) |
Sample required: 2 sets of completed products with assembly instruction (if applicable) are required. 1 more set required for toxicity/flammability test.
Turnaround time: normal (5 working days) for other testing and TAT for EN 120 is 10 working days and varied upon usage of chamber.
