Our ServiceIP ProductProduct
Your Location：Home > IP Product16 CFR 1219& ASTM F1169-10a Full Size Baby Cribs (Latest standard ASTM F1169-2013)
Test Item:
| 5 | General Requirements |
| 5.1 | Wood parts |
| 5.2 | Lead In Paint or Surface Coating 油漆中铅含量 (16 CFR 1303) |
| 5.3 | Small parts |
| 5.4 | Corner post |
| 5.5 | Slat construction |
| 5.6 | Crib side configurations |
| 5.7 | Full-size baby cribs-Dimensions |
| 5.8 | Spacing of crib components |
| 5.9 | Toe holds |
| 5.10 | Hardware and fasteners |
| 5.11 | Toys accessories(ASTM F 963) |
| 5.12 | Recordkeeping |
| 5.13 | General Requirements review after testing(section 5) |
| 5.14 | Sharp points & edges before and after testing(16 CFR 1500.48&49) |
| 5.15 | Flammability test (16 CFR 1500.3(c)(6)(vi)) |
| 5.16 | Opening |
| 5.17 | Scissoring, Shearing, or Pinching |
| 5.18 | Labeling |
| 5.19 | Cord/Strap Length |
| 5.20 | Cribs that fold for storage or transport |
| 6 | Performance Requirements |
| 6.1 | Plastic teething rail test requirements |
| 6.2 | Cycle test |
| 6.3 | Crib Side Latch Test Requirements |
| 6.4 | Mattress support system verical impact test requirement |
| 6.5 | Mattress support system test requirement |
| 6.6 | Crib side test requirements |
| 6.7 | Spindle/Slat strength testing |
| 6.8 | Cutouts |
| 6.9 | Entrapment in accessories |
| 6.10 | Mattress support system opening |
| 8 | Marking and labeling |
| 9 | Instructional literature |
Sample required: 2 sets of completed products with assembly instruction (if applicable) is recommended. 1 more set required for toxicity test.
Turnaround time: normal (7 working days).
