Our ServiceIP ProductProduct
Your Location：Home > IP ProductASTM F833-13b Standard Consumer Safety Specification for Carriages and Strollers
Test Item:
| 5 | General Requirements |
| 5.1 | Sharp Points and Edges(16 CFR 1500.48&49) |
| 5.2 | Small Parts |
| 5.3 | The Paint and Surface Coating |
| 5.4 | Wood parts |
| 5.5 | Latching Mechanisms |
| 5.6 | Openings |
| 5.7 | Scissoring,Shearing,Pinching |
| 5.8 | Exposed Coil Springs |
| 5.9 | Labeling |
| 5.10 | Protective Components |
| 5.11 | Seat Recline |
| 5.12 | Toy-Toy Accessories |
| 5.13 | Cord/Strap Length |
| 6 | Performance Requirements |
| 6.1 | Brake Requirements |
| 6.2 | Static Load |
| 6.3 | Stability |
| 6.4 | Restraining System |
| 6.5 | Occupant Retention |
| 6.6 | *Combination Unit of a Car Seat on a Stroller |
| 6.7 | Impact Test |
| 6.8 | Passive Containment/ Foot Opening Test |
| 6.9 | Wheel and Swivel Assemblies Detachment: |
| 6.10 | Head Entrapment with Car Seat on a Stroller or Convertible Carriage/Stroller |
| 8 | Marking and Labeling |
| 9 | Instructional Literature |
Turnaround time: normal (5 working days).
Sample Size: 2 sets of completed products with assembly instruction and all accessories (if applicable) is recommended. 1 more set required for toxicity test.
Note: If there have toy accessories with the unit, the testing prices for them should be figured in. Because the prices lies on toys' types，material and so on，they will be determined by Technical Team.
