Our ServiceIP ProductProduct
Your Location：Home > IP ProductCribs, Cradles and Bassinets Regulations Sor/2016-152
Specifications Requirements for Cribs, Cradles, Bassinets, Accessories and Stands（CNAS）
Test Item:
| 4&5 | Angle |
| 6&7 | Shearing and pinching |
| 8 | Strength and integrity of slats |
| 9 | Posts |
| 10 | Entrapment (Cribs and other products) |
| 11 | Openings formed or exposed -Structural covers(Cribs and other products) |
| 12 | Mesh-Strength and integrity |
| 13 | Flammability |
| 5.9 | Opening |
| 5.10 | Protective Components |
| 5.11 | Labeling |
| 5.12 | Stability |
| 5.13 | Cord/ strap length |
| 5.14 | Cord Springs |
| 5.15 | Entrapment in accessories |
| 5.16 | Mattress |
| 5.17 | Mattress for rigid sided products |
| 5.18 | Protrusions |
| 6 | Performance requirements for Rigid sided products |
| 6.1 | General Requirements |
| 6.2 | Crib-side Height |
| 6.3 | Spacing of Unit Components |
| 6.4 | Hardware |
| 6.5 | Fasteners |
| 6.6 | Construction and Finishing |
| 6.7 | Requirement for Cutouts |
| 6.8 | Spindle/Slat Strength Testing |
| 6.9 | Cycle Testing |
| 6.10 | Mattress Support Testing |
| 6.11 | Matterss Support System Testing |
| 6.12 | Side(s) or End(s) Latch Testing, or Both |
| 6.13 | Plastic Teething Rail |
| 6.14 | Assembly instruction on the product |
| 7 | Performance requirements for Mesh/Fabric products |
| 7.1 | Height of sides |
| 7.2 | Side deflection and strength |
| 7.3 | Floor strength |
| 7.4 | Top rail covering Material |
| 7.5 | Mesh requirements |
| 7.6 | Fabric material requirements |
| 7.7 | Mesh/Fabric assembly requirements |
| 9 | Marking and labeling |
| 10 | Instructional literature |
Sample required: 2 sets of completed products with assembly instruction (if applicable) is recommended. 1 more set required for toxicity test.
Turnaround time: normal (7working days).
