Our ServiceIP ProductProduct
Your Location：Home > IP ProductASTM F404-2017 - High Chair
Test Item:
| 5.1 | All components |
| 5.2 | Conversion kits |
| 5.3 | Compliance when used with conversion kits |
| 5.4 | Accessories |
| 5.5 | Threaded Fasteners |
| 5.6 | Sharp Points and Edges(16 CFR 1500.48&49) |
| 5.7 | Small parts |
| 5.8 | Wood Parts |
| 5.9 | Latching or locking mechanisms |
| 5.10 | Labeling |
| 5.11 | Openings |
| 5.12 | Toy components |
| 5.13 | Surface Coating(16 CFR 1303) |
| 5.14 | SPSIA requirement |
| 6 | Performance requirements |
| 6.1 | Protective components |
| 6.2 | Removable tray or Front torso supprot performance integrity |
| 6.3 | Removable tray or Front torso supprot performance-Pull Test |
| 6.4 | Static load |
| 6.5 | Stability |
| 6.6 | Exposed coil springs |
| 6.7 | Scissoring, shearing, pinching |
| 6.8 | Restraint system |
| 6.9 | Completely bounded leg openings |
| 6.10 | Structal integrity |
| 6.11 | Tray latch release mechanisms |
| 6.12 | Side containment |
| 6.13 | Protrusions |
| 8 | Labeling and warning |
| 9 | Instructional literature |
Sample required: 2 sets of completed products with assembly instruction (if applicable) is recommended. 1 more set required for toxicity test.
Turnaround time: normal (5 working days).
Note: If there have toy accessories with the unit, the testing prices for them should be figured in. Because the prices lies on toys' types，material and so on，they will be determined by Technical Team.
